Tryag File Manager
Home
-
Turbo Force
Current Path :
/
proc
/
self
/
root
/
usr
/
share
/
doc
/
lm_sensors-2.10.7
/
doc
/
busses
/
Upload File :
New :
File
Dir
//proc/self/root/usr/share/doc/lm_sensors-2.10.7/doc/busses/i2c-savage4
Kernel driver `i2c-savage4.o' Status: Alpha Supported adapters: * Savage4 * Savage2000 Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Ralph Metzler <rjkm@thp.uni-koeln.de>, Alexander Wold, and Mark D. Studebaker <mdsxyz123@yahoo.com> Main contact: Sensors mailing list Module Parameters ----------------- (none) Description ----------- The Savage4 chips contain two I2C interfaces (aka a I2C 'master' or 'host'). The first interface is used for DDC (Data Display Channel) which is a serial channel through the VGA monitor connector to a DDC-compliant monitor. This interface is defined by the Video Electronics Standards Association (VESA). The standards are available for purchase at http://www.vesa.org . The DDC bus is not yet supported because its register is not directly memory-mapped. The second interface is a general-purpose I2C bus. This is the only interface supported by the driver at the moment. This driver uses the i2c-algo-bit module which must be modprobed and/or enabled in your kernel (Character Devices -> I2C Support -> I2C Bit-Banging Interfaces).