Tryag File Manager
Home
-
Turbo Force
Current Path :
/
proc
/
self
/
root
/
usr
/
share
/
doc
/
irda-utils-0.9.17
/
Upload File :
New :
File
Dir
//proc/self/root/usr/share/doc/irda-utils-0.9.17/README.irattach
Irattach - Attaches the Linux-IrDA stack to a specified device Copyright (c) 2000 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA irattach is used to bind the Linux-IrDA stack to a device driver. So this is something you must do in order to use IrDA on your Linux machine. irattach must be run as root or installed setuid root, as it requires root privileges Usage: irattach <dev> [-d dongle] [-s] where <dev> usually the name of a tty, but can also be a FIR device -d dongle attaches a dongle driver (see below for more info) -s starts discovery of remote IrDA devices Dongles: The currently known dongles are: tekram Tekram IrMate IR-210B dongle esi Extended Systems JetEye PC (ESI-9680) dongle actisys ACTiSYS IR-220L dongle actisys+ ACTiSYS IR-220L+ dongle girbil Greenwich GIrBIL dongle litelink Parallax LiteLink dongle airport old_belkin Belkin (old) SmartBeam dongle Modules: If you have compiled the IrDA stack as modules (recommended), then you will need to add these entries to your /etc/modules.conf file # IrDA over a normal serial port, or a serial port compatible IrDA port alias tty-ldisc-11 irtty # IrCOMM (for printing, PPP, Minicom etc) alias char-major-161 ircomm-tty # To be able to attach some dongles alias irda-dongle-0 tekram alias irda-dongle-1 esi alias irda-dongle-2 actisys alias irda-dongle-3 actisys alias irda-dongle-4 girbil alias irda-dongle-5 litelink alias irda-dongle-6 airport alias irda-dongle-7 old_belkin # To use the NSC driver on a Thinkpad laptop options nsc-ircc dongle_id=0x09 alias irda0 nsc-ircc Examples Attach the IrDA stack to the second serial port and start discovery $ ./irattach /dev/ttyS1 -s Attach the IrDA stack to the first serial port where you have an ACTiSYS dongle and start discovery $ ./irattach /dev/ttyS0 -d actisys -s Attach the IrDA stack to the NSC FIR (4Mbps) device driver on a Thinkpad laptop. You must also add some entries to /etc/conf.modules (see above) $ ./irattach irda0 -s 1 Device entries you will need to use IrCOMM: mknod /dev/ircomm0 c 161 0 mknod /dev/ircomm1 c 161 1 mknod /dev/irlpt0 c 161 17 mknod /dev/irlpt1 c 161 17 Afterwards, then "ll /dev/ir*" should look like this: crw-r--r-- 1 root 161, 0 Dec 22 14:15 /dev/ircomm0 crw-r--r-- 1 root 161, 1 Nov 5 08:36 /dev/ircomm1 crw-r--r-- 1 root 161, 16 Nov 5 08:36 /dev/irlpt0 crw-r--r-- 1 root 161, 17 Nov 5 08:36 /dev/irlpt1 Dag Brattli (Wed Jan 19 11:25:17 2000)