Tryag File Manager

//etc/rc2.d/S10network

#! /bin/bash
#
# network       Bring up/down networking
#
# chkconfig: 2345 10 90
# description: Activates/Deactivates all network interfaces configured to \
#              start at boot time.
#
### BEGIN INIT INFO
# Provides: $network
### END INIT INFO

# Source function library.
. /etc/init.d/functions

if [ ! -f /etc/sysconfig/network ]; then
    exit 0
fi

. /etc/sysconfig/network

if [ -f /etc/sysconfig/pcmcia ]; then
	. /etc/sysconfig/pcmcia
fi

# Check that networking is up.
[ "${NETWORKING}" = "no" ] && exit 0

# if the ip configuration utility isn't around we can't function.
[ -x /sbin/ip ] || exit 1

# Even if IPX is configured, without the utilities we can't do much
[ ! -x /sbin/ipx_internal_net -o ! -x /sbin/ipx_configure ] && IPX=

# Even if VLAN is configured, without the utility we can't do much
[ ! -x /sbin/vconfig ] && VLAN=

CWD=`pwd`
cd /etc/sysconfig/network-scripts

. ./network-functions

# find all the interfaces besides loopback.
# ignore aliases, alternative configurations, and editor backup files
interfaces=$(ls ifcfg* | \
	    LANG=C sed -e "$__sed_discard_ignored_files" \
		       -e '/$ifcfg-lo$\|:\|ifcfg-.*-range$/d' \
		       -e '/ifcfg-[A-Za-z0-9#\._-]\+$/ { s/^ifcfg-//g;s/[0-9]/ &/}' | \
	    LANG=C sort -k 1,1 -k 2n | \
	    LANG=C sed 's/ //')

rc=0
# See how we were called.
case "$1" in
  start)
  	rc=0
	# IPv6 hook (pre IPv4 start)
	if [ "$NETWORKING_IPV6" = "yes" ]; then
		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
			/etc/sysconfig/network-scripts/init.ipv6-global start pre
		fi
	fi
  
	apply_sysctl

# bring up loopback interface
	action $"Bringing up loopback interface: " ./ifup ifcfg-lo

case "$IPX" in
	  yes|true)
	    /sbin/ipx_configure --auto_primary=$IPXAUTOPRIMARY \
				   --auto_interface=$IPXAUTOFRAME
	    if [ "$IPXINTERNALNETNUM" != "0" ]; then
	       /sbin/ipx_internal_net add $IPXINTERNALNETNUM $IPXINTERNALNODENUM
	    fi
	    ;;
	esac

case "$VLAN" in
	  yes)
	    if [ -d /proc/net/vlan ] || modprobe 8021q >/dev/null 2>&1 ; then
		test -z "$VLAN_NAME_TYPE" && VLAN_NAME_TYPE=DEV_PLUS_VID_NO_PAD
		action $"Setting 802.1Q VLAN parameters: " /sbin/vconfig set_name_type "$VLAN_NAME_TYPE"
	    else
		net_log $"No 802.1Q VLAN support available in kernel."
	    fi
	    ;;
	esac

vlaninterfaces=""
	vpninterfaces=""
	xdslinterfaces=""
	bridgeinterfaces=""

# bring up all other interfaces configured to come up at boot time
	for i in $interfaces; do
		unset DEVICE TYPE SLAVE
		eval $(LANG=C fgrep "DEVICE=" ifcfg-$i)
		eval $(LANG=C fgrep "TYPE=" ifcfg-$i)
		eval $(LANG=C fgrep "SLAVE=" ifcfg-$i)

if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
			vpninterfaces="$vpninterfaces $i"
			continue
		fi
		if [ "$TYPE" = "xDSL" ]; then
		        xdslinterfaces="$xdslinterfaces $i"
			continue
		fi

if [ "$TYPE" = "Bridge" ]; then
		        bridgeinterfaces="$bridgeinterfaces $i"
			continue
		fi
		if [ "$TYPE" = "IPSEC" ]; then
			vpninterfaces="$vpninterfaces $i"
			continue
		fi

if [ "${DEVICE%%.*}" != "$DEVICE"  -o  "${DEVICE##vlan}" != "$DEVICE" ] ; then
			vlaninterfaces="$vlaninterfaces $i"
			continue
		fi
		
		if [ "$SLAVE" = "yes" ]; then
			continue
		fi

if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ifcfg-$i > /dev/null ; then
		        # this loads the module, to preserve ordering
			is_available $i
			continue
		fi
		# If we're in confirmation mode, get user confirmation.
		if [ -f /var/run/confirm ]; then
			confirm $i
			test $? = 1 && continue
		fi
		action $"Bringing up interface $i: " ./ifup $i boot
		rc=$((rc+$?))
	done
	
	# Bring up xDSL and VPN interfaces
	for i in $vlaninterfaces $bridgeinterfaces $xdslinterfaces $vpninterfaces ; do
            if ! LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ifcfg-$i >/dev/null 2>&1 ; then
		# If we're in confirmation mode, get user confirmation.
		if [ -f /var/run/confirm ]; then
			confirm $i
			test $? = 1 && continue
		fi
		action $"Bringing up interface $i: " ./ifup $i boot
		rc=$((rc+$?))
	    fi
        done

# Add non interface-specific static-routes.
	if [ -f /etc/sysconfig/static-routes ]; then
	   grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do
              /sbin/route add -$args
	   done
	fi

# IPv6 hook (post IPv4 start)
 	if [ "$NETWORKING_IPV6" = "yes" ]; then
 		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
 			/etc/sysconfig/network-scripts/init.ipv6-global start post
 		fi
 	fi
	# Run this again to catch any interface-specific actions
	apply_sysctl
 
        touch /var/lock/subsys/network

[ -n "${NETWORKDELAY}" ] && /bin/sleep ${NETWORKDELAY}
        ;;
  stop)
  	# Don't shut the network down if root is on NFS or a network
	# block device.
        rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/" && $3 != "rootfs") { print $3; }}' /proc/mounts)
        rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' /etc/mtab)
	
	if [[ "$rootfs" =~ "^nfs" ]] || [[ "$rootopts" =~ "_netdev|_rnetdev" ]] ; then
		exit 1
	fi
  
  	# If this is a final shutdown/halt, check for network FS,
	# and unmount them even if the user didn't turn on netfs
	if [ "$RUNLEVEL" = "6" -o "$RUNLEVEL" = "0" -o "$RUNLEVEL" = "1" ]; then
		NFSMTAB=`LC_ALL=C awk '$3  ~ /^nfs/ { print $2 }' /proc/mounts`
		SMBMTAB=`LC_ALL=C awk '$3 == "smbfs" { print $2 }' /proc/mounts`
		NCPMTAB=`LC_ALL=C awk '$3 == "ncpfs" { print $2 }' /proc/mounts`
		if [ -n "$NFSMTAB" -o -n "$SMBMTAB" -o -n "$NCPMTAB" ] ; then
			/etc/init.d/netfs stop
		fi
	fi

# If this is a final shutdown/halt and there is an iSCSI session,
	# do not stop the service.
	if [ "$RUNLEVEL" = "6" -o "$RUNLEVEL" = "0" -o "$RUNLEVEL" = "1" ]; then
	        if [ $(ls -d /sys/class/iscsi_session/*/. 2>/dev/null | wc -l) -ge 1 ]; then
			exit 1
		fi
	fi
	
 	# IPv6 hook (pre IPv4 stop)
 	if [ "$NETWORKING_IPV6" = "yes" ]; then
 		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
 			/etc/sysconfig/network-scripts/init.ipv6-global stop pre
 		fi
 	fi
 
	vlaninterfaces=""
	vpninterfaces=""
	xdslinterfaces=""
	bridgeinterfaces=""
	remaining=""
	rc=0

# get list of bonding, vpn, and xdsl interfaces
	for i in $interfaces; do
		unset DEVICE TYPE
		eval $(LANG=C fgrep "DEVICE=" ifcfg-$i)
		eval $(LANG=C fgrep "TYPE=" ifcfg-$i)

if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
			vpninterfaces="$vpninterfaces $i"
			continue
		fi
		if [ "$TYPE" = "IPSEC" ]; then
			vpninterfaces="$vpninterfaces $i"
			continue
		fi
		if [ "$TYPE" = "Bridge" ]; then
		        bridgeinterfaces="$bridgeinterfaces $i"
		        continue
		fi
		if [ "$TYPE" = "xDSL" ]; then
		        xdslinterfaces="$xdslinterfaces $i"
			continue
		fi

if [ "${DEVICE%%.*}" != "$DEVICE"  -o  "${DEVICE##vlan}" != "$DEVICE" ] ; then
			vlaninterfaces="$vlaninterfaces $i"
			continue
		fi
		remaining="$remaining $i"
	done
	
	for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do
		(. ifcfg-$i
		if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

if ! check_device_down $DEVICE; then
		   action $"Shutting down interface $i: " ./ifdown $i boot
		   rc=$((rc+$?))
		fi
		)
	done

case "$IPX" in
	  yes|true)
	    if [ "$IPXINTERNALNETNUM" != "0" ]; then
	       /sbin/ipx_internal_net del
	    fi
	    ;;
	esac

action $"Shutting down loopback interface: " ./ifdown ifcfg-lo

if [ -d /proc/sys/net/ipv4 ]; then
	  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
		if [ `cat /proc/sys/net/ipv4/ip_forward` != 0 ]; then
			action $"Disabling IPv4 packet forwarding: " sysctl -w net.ipv4.ip_forward=0
		fi
	  fi
	  if [ -f /proc/sys/net/ipv4/ip_always_defrag ]; then
	        if [ `cat /proc/sys/net/ipv4/ip_always_defrag` != 0 ]; then
		        action $"Disabling IPv4 automatic defragmentation: " sysctl -w net.ipv4.ip_always_defrag=0
		fi
	  fi
	fi

# IPv6 hook (post IPv4 stop)
	if [ "$NETWORKING_IPV6" = "yes" ]; then
		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
			/etc/sysconfig/network-scripts/init.ipv6-global stop post
		fi
	fi
	
        rm -f /var/lock/subsys/network
        ;;
  status)
	echo $"Configured devices:"
	echo lo $interfaces

echo $"Currently active devices:"
	echo $(/sbin/ip -o link show up | awk -F ": " '{ print $2 }')
	;;
  restart|reload)
        cd "$CWD"
	$0 stop
	$0 start
	;;
  *)
        echo $"Usage: $0 {start|stop|restart|reload|status}"
        exit 1
esac

exit $rc